Mechanical, durability and hygrothermal properties of concrete produced using Portland cement-ceramic powder blends

Blended Portland cement-ceramic powder binder containing up to 60 % fine-ground waste ceramics from a brick factory is used in concrete mix design as an environmentally friendly alternative to the commonly used Portland cement. The experimental analysis of basic physical characteristics, mechanical and fracture-mechanical properties, durability properties and hygrothermal characteristics shows that the optimal amount of ceramic powder in the mix is 20 % of the mass of blended cement. The decisive parameters in that respect are compressive strength, liquid water transport parameters and resistance to de-icing salts, which are not satisfactory for higher ceramics dosage in the blends. In the case of other parameters studied, the limits for the effective use of ceramic powder are higher: 40 % for effective fracture toughness and specific fracture energy, 60 % for frost resistance and chemical resistance to MgCl2, NH4Cl, Na2SO4, HCl and CO2. The water vapour diffusion coefficient is found to increase with increasing ceramics content, which for wet envelopes can be considered as a positive feature, but may have a negative effect for dry envelopes. The thermal conductivity of all mixes increases fast with growing moisture content; differences of up to 50 % between the dry and water-saturated state values are observed. This has to be taken into account in energy-related calculations.